On the page that appears, configure mailing list preferred settings:
Enter the e-mail address that enables mail list subscribers
to report their problems or error messages sending requests
Since EZMLM can take care of virtually all requests
without human intervention, the list owner may read mail only
By default, all messages sent to a list are kept archived.
This way, subscribers can later retrieve messages from the
archive. For instance, subscribers haven't been following
the list for a while, or they just want to see the discussion
of a specific question.
E.g.: retrieve one message at a time with the -get command:
firstname.lastname@example.org (get message
Read more on commands to
access the ezmlm message archive.
* The archive is also used to create digests.
Check Not Archived to disable archiving the messages
sent to the list.
You can prohibit the overall access to the archive and authorize
only moderators to get at it.
Check the Digest box to set up
the mailing list with a digest function. The digest is a special
kind of mailing list extension. Instead of sending separate
messages, it sends out a collection of messages ordered by
digest subscribers collections of messages. Digest is sent
out when a predetermined time or traffic limit has been reached.
Receiving digest is very convenient for users who want to
follow a list, but not to participate in the discussion. Digests
contain each message as it was sent out by the list. No editorials,
no missing messages. If the list owner has chosen to restrict
posts and archive access to subscribers, digest subscribers
are automatically given the same privilege.
From the subscriber point of view, the digest list for the
mailing list email@example.com is called
firstname.lastname@example.org. You use
the same commands to work with digest as you do when you work
with the main list. The only difference is that you use your
commands with 'digest' indication.
Check "No prefix" to prohibit adding prefix to the subject
line of each message that does not already contain it. If you want the subject
line of each message that does not contain it, to include the prefix, place
the text in the file DIR/prefix
Here you can restrict the access to the mailing list archive
by allowing only subscribers retrieve the archive. Non-subscribers'
requests will be rejected.
Usually an applicant for subscription (email@example.com)
is sent a confirmation request. To confirm it, one should
just reply to the message. When it is done, recipient's address
is added to the database and he becomes a subscriber.
This verification mechanism tests if the person at the subscription
address really wants to be a subscriber. You can always include
or exclude confirmation from the subscription procedure.
Normally, confirmation is not required to unsubscribe from a mailing list.
However, this option gives added security in that one can't remove another without permission.
Mailing list users are not allowed to list the addresses of
all subscribers. Still, you can allow remote administrator
to get it. The subscription log stores entries for each modification
made to the subscriber database. Remote administrators can
list this log or search it for specific entries. For example,
listing this file allows the remote administrator to see recent
additions and removals.
In special cases, the list owner may set up the list to be
message moderated. On a message moderated list, messages,
instead of going directly to the list (to send messages to
the list, one must know its name. If the list is called firstname.lastname@example.org,
just send a message to email@example.com), are
sent to one or more moderators. They can accept or reject,
but not modify the message. If the message is accepted, it
is sent to the list unmodified. If it is rejected, it is e-mailed
back to the sender, optionally with an explanation from the
moderator. On moderated lists it may take a little longer
for the message to reach all the subscribers, since it has
to be read and approved by at least one moderator before being
sent out to the subscribers.
Here, you can allow remote administrators to edit the text
files that make up most of the ezmlm responses. Replies are
sent only if the target address is a remote administrator.
With this switch, ezmlm replies to the -edit command with
a list of the files in dir/text/. Only files where
editing seems reasonable are included in the list. The remote
administrator can edit any file in dir/text/ by sending
e-mail containing the new text to -edit.file where ``file''
is the name of the file replaced (edited). In reply to this
command, ezmlm sends a message with the file and editing instructions.
A ``cookie'' based on the date, file name, and contents of
the file is added to the ``Reply-To:'' address. The cookie
becomes invalid as soon as the file has been changed, or after
27 hours, whichever is shorter. Also, the cookie cannot be
used to edit any other file, even if the other file has exactly
the same content.
Here you can disable posting by subscribers to the mailing
list, so they will only receive messages posted by moderators.
This is usually chosen to send announcement or notifications
where the interaction between recipients is not intended.
If you enable this function, users will be required to request
to the remote administrator in order to retrieve mail list
archives. Otherwise, archive will be accessible only to the remote administrator.
With this option enabled, it will process commands sent in the subject to list-request@host.
A remote administrator is an address with the rights to do
certain administrative tasks remotely by E-mail. Depending
on how the list is configured, remote administrators may have
the right/ability to list subscribers, search for subscriber
addresses by name, add and remove subscriber addresses and/or
edit the texts that are sent in reply to list commands.
Mailing lists may use subscription moderation. Subscription
to these lists is identical to the process described above,
except that after confirmation the request is passed on to
the list moderator(s). One becomes a subscriber only after
his request has been approved by a moderator, i.e. he replies to the ``Reply-To:'' address.
You can set up your mailing list to allow posts from subscribers
only. In this case posts received from non-subscribers will
be rejected and sent back.
As per ezmlm manpages,
"there is no reason to combine of SENDER checks on posts with message
moderation. Therefore, the combination of the -u switch with the -m switch is
used for a configuration with SENDER restrictions (like with -u alone), with
the difference that posts from non-subscribers will be sent for moderation
instead of being rejected. This allows the list admin to let non-subscribers
post occasionally, as well as to catch subscribers posting from
For specific details on how to configure your mail list, please read documentation